Bryston – B135³

866.400 RSD
The Bryston B135³ Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.

Inputs: 6x RCA Single Ended Pairs, 2x RCA Single Ended Pairs (Record In, Power Amp In), 2x Optical (TOSLINK)*, 2x SPDIF (RCA)*
Outputs: 2x RCA Single Ended Pairs (Record Out, Preamp Out), Speaker Terminals, ¼” Headphone Jack
Control: RS-232 (DB9), AUX IR, 2x 12V Output Triggers

Features:

135W into 8 Ohms (180W into 4 Ohms)
Over 30,000 MFD of filter capacitance per channel
Three ultra-low-noise power transformers
Separate ground paths for Digital and Analog
Gold plated switch, contacts, and connectors
Pre-out/main in connectors
Convection cooled and housed in a fully aluminum chassis
RS-232 serial data port for remote control via Crestron, AMX or similar control systems

Options:

Available with silver or black faceplate
17” or 19” faceplate available (non-rack mountable)
Optional internal DAC or internal MM phono (see Accessories in Other Products)
BR2 remote control available (see Accessories in Other Products)
*Only available with internal DAC, SPDIF replaces RCA single ended pair.


Amplifier Section


Power Output Per Channel 8Ω Load: 135W


Amplifier Gain High: 29dB 28.28 V/V


Sensitivity (into 8Ω) High: 1.0V High: 1.16V 100W 135W


Input Impedance Single Ended ≈30kΩ


IMD 60Hz + 7kHz 4:1 ≤0.005%


THD+N 20Hz-20kHz @ 135W, 8Ω ≤0.005%


Slew Rate >60V / µS


Bandwidth <1Hz to >100kHz


Damping 20Hz, 8Ω >500


Preamplifier Section


Frequency Response 20Hz – 20kHz ±0.05dB


IMD or THD <0.003%


High Level Sensitivity 500mV


Noise 20Hz – 20kHz, ref. 1V Input -100dB


Sections Combined


Weight 12 kg


Power Consumption (Watts) Standby: Idle: 2 Ch. 17W 8Ω: 2 Ch. 135W 8Ω: <1W ≤70 210 500


Heat Load (BTU/Hour) Idle: 2 Ch. 135W 8Ω: ≤239 1706



Deklaracija :
Naziv: BRYSTON – B135³
Vrsta robe POJACALO
Uvoznik: AUDIO PLUS DOO
Zemlja proizvodnje: KANADA

Slični proizvodi