NAD C375

NEDOSTUPNO



Kultno pojačalo po izuzetnoj ceni 2 godine garancija.





KEY FEATURES

150W x 2 Continuous Power into 4 Ohms and 8 Ohms

250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 Ohms, respectively

PowerDriveTM circuit

NAD SR-8 Full System Remote Control

Headphone socket

Front panel Media Player (MP) input for attaching portable MP3 Player

Relay Input Switching

Holmgren Toroidal Power transformer

7 Line inputs, including two tape in/outs

All discrete circuitry

Class A Voltage Stages (Preamp and Power Amp)

Distortion Canceling Circuit

BEE Anti-saturation Clamp

Short signal path from input to output

All sockets Gold plated

Tone controls defeat switch

Main-amp input & 2 pre-amp outputs

Speaker A + B outputs and switching

Soft ClippingTM

IR Input/Output

12V trigger out

RS-232 serial port

Detachable IEC Power Cable

Optional PP375 MC/MM Phono Module

<1W Standby Power Consumption

Free of lead and other environmentally dangerous substances

PREAMPLIFIER Line Level Input, Pre Out

THD CCIF IMD, DIM 100)

<0.004% at 2V out (ref. 20Hz – 20kHz)

Signal/Noise ratio IHF

>102dB (IHF; A-weighted, ref. 500mV)

>110dB (A-weighted, ref. 2V out, Volume maximum)

>92dB (ref. 100mV out, unity gain)

Channel separation

1kHz

>80dB

10kHz

>70dB

Input impedance (R and C)

100 kilohm+ 320pF

Maximum input signal

>8Vrms (ref. 0.1% THD)

Output impedance

Pre-out

75 Ohm

Variable out

<325 Ohms

Tape out

Source Z + 1 kilohm

Input sensitivity

158mV (ref. 500mV out)

Frequency response

±0.1dB (ref. 20Hz – 20kHz, Tone defeat ON)

±0.5dB (ref. 20Hz – 20kHz, Tone defeat OFF)

Maximum voltage output

IHF load

>10V (ref. 0.03% THD)

600 Ohm load

>10V (ref. 0.03% THD)

Tone Controls

Treble

±5dB at 10kHz

Bass

±8dB at 100Hz

POWER AMPLIFIER Main In, Speaker Out

Continuous output power into 8 Ohm and 4 Ohm (Stereo)

>150W (ref. rated THD, 20Hz-20kHz, both channels driven)

Continuous output power into 8 Ohm (Mono, Bridge mode)

>330W

Rated THD (CCIF IMD, DIM 100)

<0.009% (ref. 20Hz – 20kHz)

Clipping power

>170W (ref. 1kHz 0.1% THD)

IHF dynamic power

8 Ohm

250W

4 Ohm

410W

2 Ohm

600W

IHF dynamic power (Bridge mode)

8 Ohm

800W

4 Ohm

1200W

Peak output current

>50A (ref. 1 Ohm, 1ms)

Signal/noise ratio

>102dB (A-weighted, ref. 1W)

>123dB (A-weighted, ref. 150W)

Damping factor

>200 (ref. 8 Ohms, 50Hz and 1kHz)

Frequency response

±0.1dB (ref. 20Hz – 20kHz)

3Hz – 70kHz (ref. -3dB)

Input impedance

10 kilohm + 200pF

Input sensitivity

1.2V (for 150W in 8 Ohms)

Voltage gain

29dB

Headphone output impedance

68 Ohms

Channel separation

1kHz

>85dB

10kHz

>75dB

Trigger Out

Output resistance

120 Ohms

Output current

50mA

Output voltage

+12V ±10%

GENERAL SPECIFICATIONS

Continuous Output Power into 8 Ohms and 4 Ohms (Stereo)

>150W (at rated THD, 20Hz-20kHz, both channels driven)

THD CCIF IMD, SMPTE IMD, DIM 100

<0.009% (250mW to 150W, 8 Ohms and 4 Ohms)

Signal/Noise Ratio

>94dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)

>113dB (A-weighted, ref. 150W out in 8 Ohms, maximum volume)

Frequency response

±0.2dB (ref. 20Hz – 20kHz, Tone Defeat ON)

10Hz – 65kHz (ref. -3dB)

Channel separation

1kHz

>80dB

10kHz

>70dB

Power Consumption

Rated power

290W (at 230V AC 50Hz; 120V AC 60Hz)

Standby power

<1W

Idle power

<120W

WEIGHT & DIMENSIONS

Net

435 x 133 x 352mm

17 1/8 x 5 1/4 x 13 7/8″

Gross*

435 x 150 x 396mm

17 1/8 x 5 15/16 x 15 5/8″

Net weight

15.3kg (33.7lb)