McIntosh MT10

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable. Contact your local dealer to learn more.





Cartridge Specifications
Cartridge Type
Moving Coil, Low Output

Output Level
0.5 mV at 5 cm/s

Load Impedance
400 to 500 Ohms recommended

Frequency Response
20Hz to 50kHz

Channel Separation
Greater than 30dB at 1Khz

Compliance
6 x 10-6 cm/dyne

Recommended Tracking Force
2.4 g

Channel Difference
Less than 0.3dB at 1kHz

Total Mass
11 g

Stylus
Elliptical Diamond

Cantilever Material
Aluminum

Tonearm Specifications
Bearing

Sapphire and Ceramic
Arm Tube

Dural-Aluminum
Counterweight

Eccentric
Adjustments
Vertical Tracking Angle, Antiskate, Azimuth

Turntable Specifications

Playback Speeds
33-1/3, 45 and 78 rpm

Motor Type
DC Brushless

Speed Control
Electronic w/ braking feature

Platter
Silicon Acrylic

Platter Bearing
Magnetic Suspended Ceramic

Signal To Noise Ratio
41dB - 44dB

Wow & Flutter
0.10% - 0.15%

Stereo Outputs Unbalanced 1

Power Control Input 1

Power Control Output 1

Platter Light Yes

Speed Control Fine Adjustment Yes

General Specifications

Dust Cover Included No

Weights & Dimensions
Unit Dimensions (W x H x D)
(44.45cm) x (22.38cm) x (53.34cm)

Note: Tone Arm Height will vary depending on the type of Cartridge installed.