McIntosh MT10 Precision Turntable

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable



Specifications

CARTRIDGE SPECIFICATIONS

Cartridge Type

Moving Coil, Low Output

Output Level

0.5 mV at 5 cm/s

Load Impedance

400 to 500 Ohms recommended

Frequency Response

20Hz to 50kHz

Channel Separation

Greater than 30dB at 1Khz

Compliance

6 x 10-6 cm/dyne

Recommended Tracking Force

2.4 g

Channel Difference

Less than 0.3dB at 1kHz

Total Mass

11 g

Stylus

Elliptical Diamond

Cantilever Material

Aluminum

TONEARM SPECIFICATIONS

Bearing

Sapphire and Ceramic

Arm Tube

Dural-Aluminum

Counterweight

Eccentric

Adjustments

Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS

Playback Speeds

33-1/3, 45 and 78 rpm

Motor Type

DC Brushless

Speed Control

Electronic w/ braking feature

Platter

Silicon Acrylic

Platter Bearing

Magnetic Suspended Ceramic

Signal To Noise Ratio

41dB - 44dB

Wow & Flutter

0.10% - 0.15%

CONNECTIVITY

Stereo Outputs Unbalanced

1

CONTROL

Power Control Input

1

Power Control Output

1

Platter Light

Yes

Speed Control Fine Adjustment

Yes

GENERAL SPECIFICATIONS

Dust Cover Included

No

WEIGHTS & DIMENSIONS

Unit Dimensions (W x H x D)

17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)

Note: Tone Arm Height will vary depending on the type of Cartridge installed.

Unit Weight

42 lbs (19 kg)

Shipping Weight

63 lbs (28.6 kg)