Za montažu ovog zvučnika potrebna je dubina od samo 50 mm
Between 2" stud frames or where pipework or cabling reduces mounting depth, the hybrid back-box construction and proprietary full-range driver array combine to deliver consistent audio quality with exceptional installation versatility.
The hybrid back-box provides the best of all worlds for installer and customer. Combined, the three proprietary 3" mid-bass units achieve the bass output of a 6 1/2" driver, all from a super-stealthy flush-fitted profile.
In keeping with Monitor Audio’s renowned design rigour, the crossover comprises high quality film capacitors and low loss inductors - selected for signal integrity - ensuring peerless audio detail and dynamics from a speaker of its size and application. When the CSS230 is in ‘ported’ mode, a fine gauze protects the acoustic system from dust ingress.
Optional square or premium grille can be used with this model.
Key Features
Super-slim mounting depth 50 mm (2") designed to fit within 2” stud walls or where space is restricted
Hybrid CP ‘Controlled Performance’ style, enclosed or open back-box option provides flexible high performance options and sound isolation in one (pictured right)
Driver configuration of three 3" C-CAM bass/mid-range drivers in a radial array around a 19 mm C-CAM Gold Dome tweeter (fixed position) and high quality crossover design offers Monitor Audio’s award-winning signature sound quality
Gold plated sprung push terminals are reliable and easy to connect
Magnetically attached ‘Trim-less’ round and square grille options for discreet, reliable and easy servicing, flexible in-wall/ceiling installation, paintable to blend with décor
Patented Tri-Grip dog leg fixings – Reliable, robust and quick to install
Existing CB6 pre-construction bracket for easier system design and planning
Frequency Response (-6 dB)
100 Hz – 30 kHz sealed ‘CP’ (85 Hz – 30 kHz –open back)
Nominal Impedance
8 ohms
Sensitivity (1W@1M)
86 dB
Maximum SPL
103.8 dBA
Power Handling (RMS)
40 Watts – Full range (60 watts with crossover set to 100 Hz @ 12 dB/Octave)
Recommended Amplifier Requirements
10 - 60 W
Drive Unit Complement
3 x 3" C-CAM cone bass-mid drivers
1 x 19 mm (3/4") C-CAM Gold Dome tweeter
Crossover Recommendation
100 Hz at a minimum of 12 dB/Octave (24 dB/Octave optimum)
Connection
Gold Plated Sprung push terminals – for bare wire connection up to 4 mm(2)
Overall Diameter (Including Grille)
250 mm (913/16")
Overall Depth (Including Grille)
54 mm (21/8")
Cut-Out Hole Diameter
211 mm (81/4")
Mounting Depth
50 mm (2")
Optional Square Grille - Outer Dimensions
249 x 249 mm (9 3/16")
Fixing Type
3 position Tri-Grip dog leg fixings
Construction Material
ABS (UL94 rated, RoHS2 Compliant) – Painted steel grille
Weight
2.88 kg (6 lb 5 oz)
Pre-Construction Bracket
CB6 Pre-Construction Bracket (Purple)
Between 2" stud frames or where pipework or cabling reduces mounting depth, the hybrid back-box construction and proprietary full-range driver array combine to deliver consistent audio quality with exceptional installation versatility.
The hybrid back-box provides the best of all worlds for installer and customer. Combined, the three proprietary 3" mid-bass units achieve the bass output of a 6 1/2" driver, all from a super-stealthy flush-fitted profile.
In keeping with Monitor Audio’s renowned design rigour, the crossover comprises high quality film capacitors and low loss inductors - selected for signal integrity - ensuring peerless audio detail and dynamics from a speaker of its size and application. When the CSS230 is in ‘ported’ mode, a fine gauze protects the acoustic system from dust ingress.
Optional square or premium grille can be used with this model.
Key Features
Super-slim mounting depth 50 mm (2") designed to fit within 2” stud walls or where space is restricted
Hybrid CP ‘Controlled Performance’ style, enclosed or open back-box option provides flexible high performance options and sound isolation in one (pictured right)
Driver configuration of three 3" C-CAM bass/mid-range drivers in a radial array around a 19 mm C-CAM Gold Dome tweeter (fixed position) and high quality crossover design offers Monitor Audio’s award-winning signature sound quality
Gold plated sprung push terminals are reliable and easy to connect
Magnetically attached ‘Trim-less’ round and square grille options for discreet, reliable and easy servicing, flexible in-wall/ceiling installation, paintable to blend with décor
Patented Tri-Grip dog leg fixings – Reliable, robust and quick to install
Existing CB6 pre-construction bracket for easier system design and planning
Frequency Response (-6 dB)
100 Hz – 30 kHz sealed ‘CP’ (85 Hz – 30 kHz –open back)
Nominal Impedance
8 ohms
Sensitivity (1W@1M)
86 dB
Maximum SPL
103.8 dBA
Power Handling (RMS)
40 Watts – Full range (60 watts with crossover set to 100 Hz @ 12 dB/Octave)
Recommended Amplifier Requirements
10 - 60 W
Drive Unit Complement
3 x 3" C-CAM cone bass-mid drivers
1 x 19 mm (3/4") C-CAM Gold Dome tweeter
Crossover Recommendation
100 Hz at a minimum of 12 dB/Octave (24 dB/Octave optimum)
Connection
Gold Plated Sprung push terminals – for bare wire connection up to 4 mm(2)
Overall Diameter (Including Grille)
250 mm (913/16")
Overall Depth (Including Grille)
54 mm (21/8")
Cut-Out Hole Diameter
211 mm (81/4")
Mounting Depth
50 mm (2")
Optional Square Grille - Outer Dimensions
249 x 249 mm (9 3/16")
Fixing Type
3 position Tri-Grip dog leg fixings
Construction Material
ABS (UL94 rated, RoHS2 Compliant) – Painted steel grille
Weight
2.88 kg (6 lb 5 oz)
Pre-Construction Bracket
CB6 Pre-Construction Bracket (Purple)
Slični proizvodi
